Lift your vehicle with suspension kit from TeraFlex
TeraFlex Alpine CT (Cross-Trail) suspension systems build on the Sport ST (Street & Trail) suspension systems. A 3,5" suspension system opens up a new world of tyre sizes and off-road possibilities. If you have that "do it all" attitude, one of the 3,5” Alpine CT3 suspension systems will make it happen. The Alpine CT3 short arm features the Alpine short control arms as well as a front HD forged adjustable track bar, and front and rear track bar axle brackets for maximum tunability and flawless performance for years to come.
Adjustable Alpine Short Control Arms balance front caster and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tyre position on vehicles with 0-4,5” lifts. The Front HD Forged adjustable track bar and track bar axle bracket(s) improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.
This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).
Specs:
- Increases ground clearance
- Allows larger wheels to be fitted
- Improves handling, reduces noise and vibration
- Improves steering response
- Provides full range of motion
Max tyre diameter:
- Sport/Overland Fenders: 35" (w/ 3" front & 2,5" rear bump stops)
- Rubicon Fenders: 37" (w/ 2" front & 2.5" rear bump stops)
In the box:
- (2) Front coil spring Lift 3,5"
- Short control arm kit Alpine
- Front track bar axle bracket
- Front progressive bump stop kit
- Front lower bump stop strike pad extensions
- Front lower bump stop strike pad shims
- Front sway bar quick disconnected
- Front brake line anchor kit
- Rear sway bar kit
- Rear driveline center support mount lowering spacer kit
- Extended travel shock accessory kit
- Rear upper coil spring retainer kit
- Rear lower coil spring retainer kit
- Rear upper bump stop extensions kit
- Rear upper bump stop shim kit
- Rear lower bump stop strike pad shim kit
- Rear progressive bump stop kit
- Rear track bar axle bracket
- (2) Rear coil spring Lift 3,5"
- All necessary hardware
Notes:
- Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters TX1057000 for stock wheels (sold separately)
- Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tyres
- Sport/Sahara Fenders Require 3” Front And 2.5” Rear Bump Stop Extensions and Shims to fit 35” tyres
- Rubicon Fenders require 2” Front and 2” Rear Bump Stop Extensions to fit 35” tyres
- Rubicon Fenders require 2,5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tyres
- Alignment required
- Requires longer shocks, we recommended TeraFlex and Fox
