EN
Close
You have no items in your shopping cart.
Search

Polyurethane suspension bushings set OFD

SKU: OFDBUSHKITXJ
Manufacturer part number: OFD OFDBUSHKITXJ
€813.00
OFD bushings will allow you to adjust the hardness of your car's suspension after modifications, and improve the characteristics and lifespan of the system.
Availability:
Available in 3-7 days
+ -

Bushings for off-road modifications

Do you hear knocking in the suspension of your car? Do you feel like you're driving a boat because of the increased weight? Perhaps it's time to replace your old rubber bushings. OFD comes to the rescue by busting myths about the discomfort and hardness of polyurethane suspension. OFD bushings are adjusting the stiffness and characteristics of the system to the weight increased by the mods. Their hardness is matched to the extra pounds, allowing the suspension and steering to work properly. The kit replaces factory bushings, which may be too soft.

Factory doesn't mean better

Polyurethane bushings from OFD, are a great replacement for rubber factory parts. They will improve the handling of your car and increase stiffness only where needed. Suspension geometry will remain set throughout the whole wheel travel in any given situation. They feature resistance to oils, solvents, gasoline and 10% acid solutions. By opting for polyurethane bushings, you increase comfort and safety while driving and can extend the life of suspension components.

Specs:

  • Designed to adjust suspension to increased weight
  • Improve driving comfort and safety
  • Absorb vibrations
  • Resistant to environmental factors

In the box:

  • Front upper control arms bushings
    • (4) Polyurethane bushing
    • (4) Inner sleeve
    • (4) Outer sleeve
  • Front lower control arms bushings
    • (4) Polyurethane bushing
    • (4) Inner sleeve
    • (4) Outer sleeve
  • Front sway bar mount bushings
    • (2) Polyurethane bushing
  • Rear lower sway bar link bushings
    • (4) Polyurethane bushing
    • (2) Inner sleeve
  • Rear sway bar mount bushings
    • (2) Polyurethane bushing
  • Front Panhard rod to diff mount bushings
    • Polyurethane bushing
    • Inner sleeve
  • Rear leaf springs bushings
    • (12) Polyurethane bushing
    • (6) Inner sleeve

Notes:

  • Proper installation requires the use of generous amounts of silicone-based grease with a PTFE additive. We do not recommend using any lithium or molly-based grease as they tend to dry out the polyurethane resulting in cracks and premature wear
  • Fits only Jeep Cherokee XJ 88-01
Products specifications
Part TypeSuspension, Steering
*
*
*
*