Pogrammer module Z Automotive Tazer RAM

Tazer RAM is to be an essential tool for owners of the RAM 1500. All engine and transmission variations supported, including export models. Simple, plug-in installation – simply unplug the SGW module and plug the Tazer RAM in its place.  Located above the OBD2 Diagnostic connector. Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Tazer RAM offers two working types:

• Permanent vehicle settings – functions works wether the module is plugged in or not
• Live vehicle functions – functions works while module is plugged in Only

Permanent vehicle settings:

• Calibrate speedometer for non-factory tire sizes
• Configure vehicle for gear ratio changes
• Can disable Tire Pressure Monitoring System warnings, or modify PSI settings*
• Can enable/disable Daytime Running Lights and the user can select lights to use (application dependent)
• Can enable the addition of factory fog lights
• Can support LED lights
• Can disable Fog Light Dropout (allowing hi and low beams and fog lights on simultaneously)
• Can enable the addition of factory backup camera and aftermarket front camera*
• Can disable SiriusXM Travellink traffic and weather warnings
• Can enable aux video/audio for front camera and/or external video source
• Can enable factory aux buttons, support addition of power-folding mirrors, and more
• One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to stock. No need to remember or write down original settings when returning to stock before dealer service.

Live vehicle functions:

• AutoFold – Can automatically extend and retract power folding mirrors when vehicle is turned on and off
• Windows from keyfob – can open and close front door power windows from the keyfob
• Line Lock – Uses ABS solenoids to lock the front wheels for burnouts at the track or just for fun
• Can enable in-motion navigation address entry
• Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior lights, perfect for car shows. Control from Key Fob or steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal police/EMS.
• Cooldown mode: Turn engine fans on demand when the ignition is on, engine not running – good for the staging lanes at the track or after a run in the trails.
• Winch Mode: temporarily raise engine idle to 2000 RPM when winching or jump starting another vehicle.
• Spoof4Lo: raises idle and shift points, and allows use of lockers and sway bar disconnect in any transfer case mode on Power Wagons
• Clear CELs – reset that pesky check engine light. Good when you have mods that set the light and you know exactly why.
• Fully disable ESP/Traction Control by pressing and holding ESP button
• 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display

Notes:

• For RAM1500 manufactured after 2018 required use of OBDII T-Bypass Z Automotive ZABSR18 (sold separately)