Suspension kit Zone Lift 4"

Raise your vehicle with coil spring spacers from Zone

This 4" suspension lift lets you clear 32" tyres and have the ground clearance and wheel travel you want when you venture off road. Bump stop extensions properly limit up-travel, protecting your vehicle. Full length replacement coil springs add additional ride height while maintaining ride quality. Heavy-duty lower control arms improve strength and articulation while correcting caster. Heavy-duty, extended-length sway bar links improve operating angle for reduced body roll. Rear track bar bracket correctly positions rear axle under vehicle. Transfer case drop kit included to correct rear driveline angle and allow use of factory rear driveshaft.

Specs:

• Lift 4"
• Increases ground clearance
• Allows for 32" tyres assembly
• Durable components

Recommended tyres and wheels:

• Wheel size 15x8 | Backspacing 4" | Max. tyre size 31x10,5
• Wheel size 15x8 | Backspacing 4,5" | Max. tyre size 32x11,5
• Wheel size 16x8 | Backspacing 4,5" | Max. tyre size 32x11,5

In the box:

• (2) Front coil spring
• Lower control arms
• (2) Sway bar link
• Track bar relocation bracket
• Transfer case drop brackets
• Bump stop extensions
• (2) Rear coil spring
• Hardware

Notes:

• Fits gas engine models ONLY
• Fits 4WD models ONLY
• The kit does not include shock absorbers, which are necessary for the lift to function correctly. We recommend replacing the shock absorbers, we recommend: BDS85967 and BDS85976 (sold separately)
• If your vehicle is equipped with factory a CV style front driveshaft, an aftermarket U-joint style driveshaft will be required to eliminate driveline vibration
• V8 engine equipped models may not achieve stated lift height