How to refresh and protect your alloy wheels or car body?
Cleantle Admire is one of the best protective coatings. It's characterised by quick and easy application, long durability and excellent self-cleaning properties. The surface is highly hydrophobic after application. The product gives an amazing shine and darkens it slightly. Protect your car from UV radiation, rain and other weather conditions.
Opt for quality and choose Cleantle Admire
Versatile use and excellent performance
Protective coating can be applied to paint, plastic parts, rubber parts (including tyres), headlights, glass/glass parts and wheels. It is also possible to apply the product outdoors. For paint, 15-20 ml is sufficient for a medium-sized car, 5-10 ml for a set of wheels, 5-10 ml for glass, 10-15 ml for tyres and rubber parts respectively.
An effect that lasts for years!
The durability of the coating depends on how well you prepare the surface for its application and on further care. Proper cleaning and preparation prior to application of the coating is essential for maximum durability. If properly applied, the coating will last for 3 years or up to 50,000 km.
Specs:
- Capacity: 30 ml
- Strong gloss and slight darkening of the surface
- Quick and easy application
- Strong water repellency and high durability
- Makes the surface slippery
- Resistant to chemicals and UV radiation
- Wide range of application conditions (temp from 8-35 degrees / humidity 30-80%)
- Fast curing (12h)
- High washability - this reduces the use of chemicals / no need to use aggressive chemicals
- Contains added graphene and carbon nanotubes
- Biodegradable product
- Expiration date - 2 years from opening the bottle
Application instructions:
- Shake the bottle for a minimum of 30sec before use. During application, particles of the component will still be visible, but shaking the product will prevent it from settling to the bottom of the bottle. Repeat before each application.
- Prepare the surface (paintwork/wheels/glasses/plastics/tires/other rubber parts) - removing all contaminants - especially such as tar or metallic filings. If necessary, polish the paintwork to remove any imperfections 100%.
- Degrease the prepared surface with IPA 50%.
- Apply the product in sections (e.g. 40x40cm) and in cross-hatching movements using the applicator provided - for paintwork, glass, plastics - or a microfibre applicator - for tyres, rubber parts.
- After 1-2 minutes after application, rub the product with a microfibre applicator until streaks are completely removed.
- For glass and plastic parts, remove or wipe off excess after 1-2 minutes.
- For tyres - a lot depends on the model and age of the tyres, old tyres tend to "absorb" the coating, while new tyres need to be wiped/rubbed off after approx. 1-2min after application.
- Consumption on an average sized car is approx. 20ml (paint alone), 10ml (wheels), 20ml (windows + plastics + tyres)
- Do not allow the coating to dry without touching up
Recommendations:
- Carry out applications in a closed, well-ventilated room
- Application outdoors is also possible, but it is important not to do this directly in the sun or in strong wind.
- Do not apply the coating to hot components
- Allow the coating to set for at least 12 hours. Do not allow interaction with water, rain or other precipitation during this time.
- If the paintwork gets wet in the first 12 hours, dry the car with a soft microfibre, without allowing the water to dry on its own
- We recommend not washing the car for the first 5-7 days with car chemicals. If necessary, rinse the car with demineralised water only (last programme at a touchless car wash).
- Full activation of the coating takes place after 24h
- Use proven cleaning products - the coating is resistant to cleaning agents in the pH range 3-12
- Keep product away from flame
- Use gloves and mask for application
